Low to Medium Pressure LC Columns
Chemglass Life Sciences Column, Chromatography, 50/30 Socket Joint, 2 1/2in ID X 24in E.L., 4mm Stopcock
Column, Chromatography, 50/30 Socket Joint, 2 1/2in ID X 24in E.L., 4mm Stopcock. Absorption chromatography column for rapid preparative separations as described by W.C. Still, M. Kahn and A. Mitra of Columbia University in JOURNAL OF ORGANIC CHEMISTRY 43, 2923 [1978], and covered in U.S. Patent Number 4,293,422 dated October 6, 1981. Moderate resolution can be obtained with this inexpensive to setup and operate column. Column is constructed using MEDIUM WALL tubing. Glass wool (not supplied) is used to support column packing. Can be used with optional CG-1201 flow controller and CG-1200 reservoir. Connections between the column, reservoir and flow control adapter are spherical joints connected with CG-150 stainless steel clamps.
Bio Rad Laboratories ECONO-COLUMN CHROMATOGRAPHY CO
Column, Chromatography; Bio-Rad; Econo-Column; Glass; Autoclavable; Operates at pressure of <1 atm (14.7psi); Accepts both Econo-Column funnels and Econo-Column flow adaptors; 1.5 x 10cm; 18mL; 2
Bio Rad Laboratories ECNO-COLMN CHRMTGRPHY CO
Column, Chromatography; Bio-Rad; Econo-Column; Glass; Autoclavable; Operate at pressures of
Sepax Technologies Inc Sepax HPLC Column SRT SEC-1000, 5 µm, 4.6 x 150 mm
Utilizing proprietary surface technologies, SRT SEC phases are made of the uniform, hydrophilic, and neutral nanometer thick films chemically bonded on the high purity and enhanced mechanical stability silica. This proprietary surface technology results in excellent column-to-column reproducibility. The nature of the chemical bonding and the maximum bonding density of the thin film benefit SRT SEC phases with high stability and negligible non-specific interactions. Along with the widest pore size selection of 100, 150, 300, 500, 750, 1000 and 2000Å, SRT SEC packings have highest capacity that enables highest resolution.
Sepax Technologies Inc Sepax HPLC Column SRT SEC-1000, 5 µm, 4.6 x 50 mm
Utilizing proprietary surface technologies, SRT SEC phases are made of the uniform, hydrophilic, and neutral nanometer thick films chemically bonded on the high purity and enhanced mechanical stability silica. This proprietary surface technology results in excellent column-to-column reproducibility. The nature of the chemical bonding and the maximum bonding density of the thin film benefit SRT SEC phases with high stability and negligible non-specific interactions. Along with the widest pore size selection of 100, 150, 300, 500, 750, 1000 and 2000Å, SRT SEC packings have highest capacity that enables highest resolution.
Bio Rad Laboratories Econo-Column Chromatography Columns | 2/PK
Use these empty glass chromatography columns with low-pressure (<1 bar) chromatography systems or gravity flow separations. Econo-Column columns are ideal for simple packing and procedure running. They are 2.5x5cm with a 25ml volume. The porous polymerbed support at the bottom of the column retains fine particles. They have translucent polypropylene end fittings which allow viewing of the entire column bed. The columns are autoclavable and NaOH compatible. Includes one stopcock per column ordered.
Cole-Parmer Diba Omnifit EZ Chromatography Column w/ 2 Adjustable Endpieces, 5 x 150 mm; 1/ea
Ergonomically designed EZ columns are easy to use yet provide excellent results. Columns are ideal for low- to medium-pressure applications and are resistant to many solvents used in liquid chromatography. Modular design gives you the flexibility to mix and match column sizes with different endpiece types to meet your specific requirements. Columns come with two adjustable endpieces pre-assembled with 25 m PE frits. Each adjustable endpiece gives you the flexibility to modify the bed length up to 80 mm in height plus the ability to make fine adjustments while causing minimal disturbance to the packed bed. Columns are supplied assembled and ready to use, with all the tubing, fittings, and connections needed to get started.
AGAROSE BEAD TECHNOLOGIES Empty FPLC 30 mL Column
FPLC column is a single use product suitable for FPLC and ÄKTA design™ chromatography systems. It is recommended to work with approximately 30ml of packed bead bed volume. The package contains 2 columns, 6 frits (polyethylene frit with a nominal pore size of 12 µm) and 4 caps. The FPLC column parts are made of polypropylene which shows excellent chemical resistance to most of the commonly used reagents
Protech International Inc 22g Guide Cannula 5mm Tubing Above Pedestal
22g Guide Cannula 5mm Tubing Above Pedestal